AutoCAD Commands

The following AutoCAD commands developed by me. Click here to download

(01) ELH: This command calculates distance from head tangent line to nozzle or component in Horizontal Vessel and writes value like this EL. +300
(02) TLH: This command calculates distance from head tangent line to nozzle or component in Horizontal Vessel and writes value like this TL. +300
(03) ELV: This command calculates distance from head tangent line to nozzle or component in Vertical Vessel and writes value like this EL. +300
(04) TLV: This command calculates distance from head tangent line to nozzle or component in Vertical Vessel and writes value like this TL. +300
(05) PV: This command is replaced by PV3D.
(06) Head: This command creates 2:1 Ellipsoidal Head.
(07) Plate: This command calculates weight of CS rectangular plate.
(08) SSPlate: This command calculates weight of SS rectangular plate.
(09) ROD: This command calculates weight of CS Rod.
(10) SSROD: This command calculates weight of SS Rod.
(11) REPAD: This command calculates weight of CS Reinforcement Pad.
(12) SSREPAD: This command calculates weight of SS Reinforcement Pad.
(13) TUBE: This command calculates weight of CS Tube.
(14) SSTUBE: This command calculates weight of SS Tube.
(15) CSP: This command calculates weight of any closed shaped plate.